A   B   C   D   E   F   G
H   I   J   K   L   M   N
O   P   Q   R   S   T   U
V   W   X   Y   Z

DARKROOM EQUIPMENTS & ACCESSORIES

AUTOMATIC X RAY FILM DRYER

Automatic Roller Type X-Ray Film Dryer specially designed for continuous, rapid, spotless and dust free drying of X-Ray films of maximum 14” ( 35 cms) width and any convenient length. It is most suitable for drying Roll Films. Minimum size of film that can be dried : 70mm width x 100 mm length ( 3”x 4”)

Features

  • Compact Design with robust body made of ABS plastic.
  • Smooth Film Transport system to avoid scratched or pressure on the emulsion.
  • Fitted with a DC Motor to transport the film from the feed section to the dryer section and finally to the receiving tray. The motor is rated for continuous operation even at a higher temperature.
  • Film entry is provided with smooth rubber rollers to squeeze out excess water and to deliver films into the drying section.
  • Fitted with a powerful fan, heaters and air filter for circulation of hot dust free air for quick and uniform drying of film.
  • Conical air tubes to disperse hot air uniformly on the entire width of film.
  • The temperature in the dryer controlled over a thermostat.
  • Supplied with a lightweight film receiving tray.

    • Technical Data
    Operating Voltage : 230 / 110 Volts -50 / 60 Hz
    Wattage : 1500 Max.
    Heater : 1000 watts
    Speed (variable) : 25 mm( 1”) per minute
    Film Size : Width 35 cms (14”) Max. & 7cms.(3”) Min.
    Dryer Size (L x W x Ht) :
    Weight : 19 Kg
     back
    AUTOMATIC X-RAY FILM PROCESSOR

  • Designed for small to high volume NDT labs
  • Smallest processor (24" x 26") available today
  • Infinite speed control adjustment to set processing time between 5 and 12 minutes Deep chemical tank for fresher chemistry longer
  • Automatic replenishment system
  • Programmable temperature control calibrated using an NIST traceable standard Tuned infrared dryer heaters for reliable film drying
  • Sealed microprocessor control
  • 1 year warranty on processor
  • 3 year warranty on microprocessor control
  • 10 year warranty on the satin-finish acrylic rollers
  • Economical automatic chemical replenishment
  • Front feed and front return with light-tight cover for immediate dark room exit
  • 5 to 12 minute second processing standard; consult Fischer for custom processing times Film widths up to 14"

    • back
    DARKROOM ALARM TIMER

    Electronic timer with digital display [Red LED] and with Piezo Electronic buzzer alarm.
    Range : 0 – 999 Seconds and 0 – 9999 Seconds
     back
    DARKROOM SAFELIGHT

    Complete with lamp and Plexiglas filter. Can be mounted on wall or hung from ceiling.
    Size : 25 X 20 cms [10” X 8”] fitted with 15 Watts lamp
    Size : 65 X 20 cms [25” X 8”] fitted with 20 Watts fluorescent tube light
     back
    INTEGRATED MANUAL X-RAY FILM PROCESSING TANK WITH BUILT IN COOLING

    The processing tank consists of a stainless steel master tank in which 3 nos. auxiliary tanks [One each for developer, Stop bath and fixer] are provided. The master tank is fitted with condensing coils, connected to compressor, capillary, motor, fan and a condenser for cooling the water in the master tank. The cold water in turn cools the processing chemicals in the auxiliary tanks. A separate washing tank with inlet and over flow is also provided. An electronic Digital Temperature indicator cum Controller maintains the temperature of the chemicals at 20ēC ą 2 ēC, as per the recommendations of the film manufacturers.

    The overall equipment is made of Stainless Steel sheet and SS frame work. All the processing tanks are made of SS316 corrosion resistant stainless steel.

    Model IPT –135 System with 13.5 liters capacity processing tanks.
    Model IPT –225 System with 22.5 liters capacity processing tanks
     back
    S.S. CLIPS

    Stainless steel clips – Single tip piercing type
     back
    S.S. CLIPS

    Stainless steel and Plastic Spools for processing long X Ray Films for Pipeline Radiography.

    Size: 70 mm x 3 mtrs.
    Size: 100 mm x 3 mtrs
    back
    S.S. HANGERS [CHANNEL TYPE ]

    STYLE : SINGLE, SINGLE, 2 IN 1, 3 IN 1, 4 IN 1, 3 IN 1, 4 IN 1, 3 IN 1, 3 IN 1
    SIZE [cm] : 35 X 43, 30 X 40, 15 X 40, 10 X 40, 7.5 X 40, 10 X 20, 7.5 X 20, 10 X 12, 7.5 X 12
    SIZE [Inches] : 14 X 17, 12 X 15, 6 X 15, 4 X 15, 3 X 15, 4 X 7.5, 3 X 7.5, 4.5 X 17, 3.5 X 17
    back
    S.S. HANGERS [CLIP TYPE]

    STYLE : SINGLE, SINGLE, 2 IN 1, 2 IN 1, 2 IN 1, 2 IN 1, 2 IN 1, 2 IN 1, 2 IN 1, 2 IN 1, 2 IN 1
    SIZE [cm] : 35 X 43, 30 X 40, 15 X 40, 10 X 40, 7.5 X 40, 10 X 20, 7.5 X 20, 10 X 12, 7.5 X 12, 10 X 12, 7.5 X 12
    SIZE [Inches] : 14 X 17, 12 X 15, 6 X 15, 4 X 15, 3 X 15, 4 X 7.5, 3 X 7.5, 4.5 X 17, 3.5 X 17, 4 X 5, 3 X 5
    back
    X-RAY FILM DRYING CABINET

    Cabinet type film dryer fitted with Heaters, Heavy Duty fan for air circulation, Thermostat to control temperature inside the cabinet. Cabinet is provided with a special timer to switch off power supply after completion of preset time. The dryer can accommodate 25 or 50 films of size 35 x 43 cms.(14” x 17”) with or without Hangers.

    Features

  • Dryer fabricated with CRCA heavy gauge steel sheet duly painted.
  • Cabinet has double walls with insulation provided to conserve heat.
  • Thermostat to control the temperature inside the cabinet at a preset value.
  • A Timer is provided for automatic switch off after preset time.
  • Provided with filters on the inlet to remove dust from incoming air.
  • Digital temperature Indicator cum controllers provided, on request.

    • Models
    D-25 ( Capacity : 25 films)
    D-50 ( Capacity : 50 films)
    back
    X-RAY FILM PROCESSING STAINLESS STEEL TANKS

    All tanks are made of SS316 Corrosion resistant Stainless Steel sheet of thickness 1.0 mm [19 SWG] and joints made by TIG welding process
    back
    X-RAY FILM PROCESSING STAINLESS STEEL TANKS [TYPE 3 in 1]

    Stainless steel Master with 2 nos. Stainless Steel processing tanks [One each for Developer & Fixer]. Additional space provided for washing the films. The master tank is fitted with Inlet and Overflow connections for running water for film washing. All tanks are made of SS 316 corrosion resistant stainless Steel. All tanks are having TIG welded joints. The inner processing tanks are available in capacities 13.5 Liters and 22.5 Liters.
    A] System with 2 nos. 13.5 liters Processing tanks : PT 135
    Master tank size: 400 mm Width x 480 Depth x 550mm Height (16”x 19”x22”)
    B] System with 2 nos. 22.5 liters Processing tanks : PT: 225
    Master tank size: 500 mm Width x 480 Depth x 550mm Height (20”x 19”x22”)
     back
    Home About Us Equipments Calibrations Projects Faq's Contact