It is used for rapid and accurate measurements of concentrate gaseous pollutants such as SO2, NOX and also Suspended
Particulate Matter (SPM) under Isokinetic Conditions, Volumetric Flow, Linear Velocity and Stack Gas Temperature. It meets
with EPA Regulations.
Specifications
| Model |
: SLE-SS113 |
| Stack Temperature Range |
: Ambient to 600°C read on a Digital Pyrometer. |
| Stack Velocity Range |
: 3 to 60 m/sec |
| Thermocouple |
: T/C sensor in SS 304 casing, length of inseration:1 m with 2 m long cable |
| Manometer |
: Digital with 0-1300 mm of H2O range |
| Pitot Tube |
: Calibrated S-type fabricated - SS 304, 1m long |
| Particulate Sampling |
: 0-60 1pm collection on thimble type filter up to 0.3 micron rating |
| Gaseous Sampling |
: 0-6 1pm collection in a set of Borosillicate glass impingers. |
| Rotameter |
: Acrylic body with 2 % FSD accuracy, 0-60 LPM for PM and 0-6 LPM for GAS. |
| Sampling Probe |
: 1m long SS tube |
| Filter Holder |
: Filter Holder suitable to hold either cellulose filteration thimble (size 28mm ID x 100 mm long) or glass fibre thimble (size 19mm ID x 90 mm long). |
| Nozzels |
: A set of 3 nozzles made of SS 304. |
| Digital Clock |
: 0-60 minutes, 1 second readout with start and stop switches. |
| Sampling Train |
: Glass Impinger 1 no. 240ml, glass impinger i no. 120ml(silica) glass impinger 2 no. 120 ml (gas) |
| Vacuum Pump |
: Monoblock Rotary Vane type, oil free, 0.5 HP single phase motor (230V) with More than 50 1pm free flow capacity. |
Features
Specially designed to monitor PM & Gaseous pollutants from stack/ chimney emissions.
Collection based on wet chemical techniques.
Measures total quantity / volume of the emissions
Rugged & convenient for sampling with oil free Vacuum Pump assembly.
Accomodated in a suitcase for better accessibility.
Convenient to use.
Back to Environment Equipments
About Us